Tienen la forma de unos guantes de mma de 5 onzas, los mismos tienen pequeñas marcas rojas las cuales llegan hasta los nudillos y viajan alrededor de los guantes de manera erratica.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a pair of gauntlets but can be collapsed into two rings of a goldlike material and concealed. Collapsing or expanding it costs a Quick Action.
Spend a Quick Action to activate. This Artifact changes into one of the following Objects: It receives the propierties of any kind of materia it touches. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance must be generic, cannot mimic specific items (such as a particular painting, a certain person’s ID, etc), and must be of a similar size and weight to this Artifact.
Your Artifact makes a genuine transformation into the new Object; it is not illusory, and the Object has fully normal and expected functionality. Any functionality which the Artifact previously possessed will not be useable until the transformation is ended.
This vehicle has a an item somewhere within it that carries a Shackled Ghost. It can be collapsed into the item the Ghost is Shackled to. When this occurs, it is as if the vehicle discorporates into thin air. It can be disguised to look like any motorized vehicle of similar size, & if introduced as such people will believe it is exactly where it's supposed to be.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a vehicle but can be collapsed into a haunted object and concealed. Collapsing or expanding it costs a Quick Action.
Spend a Quick Action to activate. This Effect cannot be used unless the item is haunted. This Artifact changes its appearance into an Object within the category of Vehicles. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
A thin coating of nanite material has been applied to this plastic card, which can now change its outer form to become a driver's license, Passport card, government employee ID, security system badge, or any other form of ID or security pass the bearer wishes, including affecting the chip, mag stripe, or NFC components to generate valid responses on scanners.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Blank SLE4442 Chip Card and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Identification & Security cards. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results.
A thin coating of nanite material has been applied to this plastic card, which can now change its outer form to become a driver's license, Passport card, government employee ID, security system badge, or any other form of ID or security pass the bearer wishes, including affecting the chip, mag stripe, or NFC components to generate valid responses on scanners.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Blank SLE4442 Chip Card and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Identification & Security cards. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The pages of the journal transform into the desired identification. A passport is the most obvious 1:1 illusion, but an official government ID and badge that flips open is also possible. Other forms of ID such as driver's license, insurance ID cards, gym memberships, etc. appear as their appropriate cards encased in a laminate sheet on each page of the journal. It is impossible to remove these IDs (as their an illusion), but this inability always seems to be an inability of the user to find the laminate seam. (If necessary there will be some modification to the laminate, allowing a magnetic strip on the ID card to be scanned.)
This Artifact can change its appearance. When not transformed, it is roughly the same size as a pocket journal and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of identification. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results.
The artifact quickly flows like water from one visage to the next, changing to resemble any set of clothing the user can imagine, changing based on the will and image of the user.
The ritual for this is a tricky one. Shape changing objects are a constant in the public's mind, but by it's nature, they aren't don't have many common symbols.
This took some effort from Vel, but after several trials Vel found a ritual involving
1 Destroying several different pieced of clothing simultaneously
2 reading then burning A variety of stories of Loki, Zeus, and other gods effortly changing shape
3 A chant about stories and specifications of shape changing objects in popular media
4 Carving the an image of a chameleon into the artifact being enchanted.
Which worked as intended.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a Chestplate and just as difficult to conceal.
Spend a Quick Action to activate. This Artifact changes its appearance into an Object within the category of Apparel. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
When used as identification and scanned, the scanner will act appropriately and bring up appropriate generic information. Further searches for the identity in the computer will turn up no results. This will not open security doors on its own.
The spy can do up their passport to take on the appearance of any valid form of identification they may need.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a passport and just as difficult to conceal.
Exert your Mind and spend an Action to activate. This Artifact changes its appearance into an Object within the category of forms of identification. This lasts until you decide to end the Effect, which may be done as a Free Action.
The new object's appearance can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.
The spy can do up their passport to appear as any valid form of identification.
This Artifact can change its appearance. When not transformed, it is roughly the same size as a passport and just as difficult to conceal.
Whenever you show this Artifact to someone, you may give a general description of an Object within the category of forms of identification, and anyone who hears the description and sees the Artifact will have their mind fill in the details to complete the illusion.
The way the Artifact is seen can mimic specific items (such as a particular painting, a certain person’s ID, etc), but must be of a similar size and weight to this Artifact.
The new appearance is illusory; it will hold up to scrutiny, but its composition is not altered and it gains no new functionality. Any attempt to use it for a function which it cannot perform (for instance, making bread look like a knife and then trying to stab someone) will cause the illusion to fail or allow a Perception check to see through the illusion, at the GM's discretion.